GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Outer Sealing Strip Replacement

Removal Procedure
  1. Lower the rear door window to the full open position.

    2. Object Number: 164734 Size: SH
  2. Remove the rear door outer belt sealing strip to rear door screw.
  3. Lift up on the rear door outer belt sealing strip to remove from the rear door pinch-weld flange.

Installation Procedure

    Object Number: 164734 Size: SH
  1. Align the rear door outer belt sealing strip to the rear door pinch-weld flange.

    2. Align the rear door outer belt sealing strip with the screw hole.

  2. Apply pressure to the rear door outer belt sealing strip until fully seated.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the rear door outer belt sealing strip to rear door screw.

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  4. Raise the rear door window to the full closed position.