GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Inner Sealing Strip Replacement

Removal Procedure
  1. Lower the rear door window to the full open position.
  2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .

    3. Object Number: 164732 Size: SH
  3. Lift up on the rear door window inner belt sealing strip to remove from the rear door pinch-weld flange.

Installation Procedure

    Object Number: 164732 Size: SH

    Important: 

       • Ensure the front end of the inner belt sealing strip is inserted into the gap formed by the weatherstrip and the door inner panel.
       • Ensure the rear end of the inner belt sealing strip is flush to the rear leg of the weatherstrip but not interfering with the path of the window.

  1. Align the rear door window inner belt sealing strip to the rear door pinch-weld flange.
  2. Apply pressure to the rear door window inner belt sealing strip until fully seated.
  3. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  4. Raise the window to the full closed position.