GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Open Assist Rod Replacement

Removal Procedure

    Object Number: 363811 Size: SH

    Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

  1. Open and support the hood.
  2. Lift up the retainer clips on the assist rod using a small flat-bladed tool.

    3. Object Number: 183073 Size: SH

    Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

  3. Remove the upper end of the assist rod from the ball joint on the hood.
  4. Remove the lower end of the assist rod from the ball joint on the lower hood hinge.

Installation Procedure

    Object Number: 625128 Size: SH
  1. Install the upper end of the assist rods on to the ball joint on the hood.

    2. Object Number: 625126 Size: SH
  2. Install the lower end of the assist rods on to the ball joint on the lower hood hinge
  3. Remove the support from the hood.
  4. Close the hood.