GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Body and Accessories 🢒 Body Front End 🢒 Front Bumper Fascia Upper Support Replacement

Removal Procedure
  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

    2. Object Number: 181776 Size: SH
  2. Remove the front bumper fascia upper support to center radiator support bolts.
  3. Remove the front bumper fascia upper support to radiator flange bolts.
  4. Remove the front bumper fascia upper support from the radiator support.

Installation Procedure

    Object Number: 181776 Size: SH
  1. Install the front bumper fascia upper support to radiator support.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front bumper fascia upper support to radiator support flange bolts.

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  3. Install the front bumper fascia to upper support to center radiator support bolts.

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  4. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .