Removal Procedure
- Remove the instrument panel upper trim pad. Refer to
Instrument Panel Upper Trim Pad Replacement
in Instrument Panel,
Gauges and Console.
- Release the remote control
door lock receiver from the instrument panel by releasing the retainer tabs.
- Remove the remote control door lock receiver.
- Disconnect the electrical connector.
Installation Procedure
- Connect the electrical
connector.
- Install the remote control door lock receiver to the instrument
panel.
Pressing into place until the retainers are fully seated.
- Install the instrument panel upper trim pad. Refer to
Instrument Panel Upper Trim Pad Replacement
in Instrument Panel,
Gauges and Console.