Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Instrument Panel Cluster (IPC) System Check performed? | -- | Go to Step 2 | |
2 | Verify the CHECK COOLANT TEMP message is always on. Does the system operate properly? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is the monitored coolant temperature an accurate representation of the engine temperature gauge? | -- | Go to Step 4 | |
4 | With a scan tool select instrument panel cluster (IPC) data, and command the check coolant temp message on. Does the check coolant temp message turn ON and OFF when commanded? | -- | Go to Engine Overheating | Go to Step 5 |
5 | Replace the IPC. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | -- | |
6 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
