GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Front Floor Console Cup Holder Replacement

Removal Procedure

    Object Number: 652129 Size: SH
  1. Open the front floor console rear cup holder.
  2. Insert a flat-bladed tool under the spring and lift the spring up from the rear cupholder.
  3. Press the rear cupholder sideways to the left to release the pivot pin from the right side pivot point in the front floor console.
  4. Remove the rear cupholder from the front floor console.

    5. Object Number: 652132 Size: SH
  5. Remove the spring from the front floor console, by pulling the spring down and out from the retainer slot.

Installation Procedure

    Object Number: 652132 Size: SH
  1. Install the spring to the front floor console, by inserting the spring up into the slot.

    2. Object Number: 652129 Size: SH
  2. Insert a flat-bladed tool under the spring and lift the spring up to allow space for the cupholder.
  3. Position the left side pivot pin of the rear cupholder into the pivot point in the front floor console.
  4. Press the rear cupholder to the left making enough space to insert the right side into the right pivot point.
  5. Release the spring and remove the flat-bladed tool.
  6. Inspect the rear cupholder for proper operation.