Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

Did you perform the PCM Diagnostic System Check?

--

Go to Step 3

Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 3.5L

1. Install a scan tool.
2. Turn the ignition switch to the RUN position.
3. Establish communication with the instrument cluster.
4. Perform a Display(s) Test.

Does the low fuel indicator light toggle ON and OFF?

--

Go to Step 4

Go to Step 5

1. Turn the ignition switch to the RUN position.
2. Using a scan tool, observe the low fuel indicator lamp input.

Does the low fuel lamp read active with the lamp illuminated?

--

Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 3.5L

Go to Step 5

Replace the instrument cluster. Refer to Instrument Cluster Replacement .

Is the repair complete?

--

System OK

--