Did you perform the Instrument Panel Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Install a scan tool.
2. Turn ON the ignition, with the engine OFF.
3. Using a scan tool, observe the Engine Oil Life percent in engine data 2.

Does the scan tool display zero percent with change engine oil message inoperative?

--

Go to Step 3

System OK

Replace the instrument cluster. Refer to Instrument Cluster Replacement .

Is the repair complete?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2