Inspect the operation of the remote CD changer.

Is the remote CD changer skipping?

--

Go to Step 2

Go to Step 3

1. Inspect the compact disc player.
2. If an error message occurred while trying to play a CD in the compact disc player, inspect the remote CD changer for the following conditions:

•	The disc is inserted upside down.

•	The disc is dirty.

•	The disc is badly scratched.

•	The disc is wet.

•	The disc has moisture build-up. Allow an hour for the condensation to evaporate.

•	Use a known good disc.

•	Extremely high internal instrument panel temperatures may cause the disc to be ejected.

Is the remote CD changer operating correctly?

--

System OK

Go to Step 3

1. Inspect the disc for proper insertion.
2. Inspect the disc for scratches.
3. Inspect the disc for dirt or fingerprints and clean as needed.
4. Observe the road for roughness. The condition may be normal.
5. Duplicate the condition with a known good disc. Some discs may contain marks not readily visible.

Is the remote CD changer operating correctly?

--

Go to Step 5

Go to Step 4

Replace the remote CD changer. Refer to Remote Compact Disc Player Replacement for service procedure.

Is the repair complete?

--

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 1