Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 | Inspect the washer solvent container fluid level. Is the washer solvent container filled? | -- | Go to Step 4 | Go to Step 3 |
3 | Fill the washer solvent container. Is the washer solvent container filled? | -- | -- | |
4 | Ensure that the hoses are correctly attached and that they are not pinched or kinked. Are the hoses OK? | -- | Go to Step 6 | Go to Step 5 |
5 | Repair the hoses. Are the hoses repaired? | -- | -- | |
6 | Inspect for clogged windshield washer nozzles. Are the nozzles clogged? | -- | Go to Step 7 | Go to Step 8 |
7 | Clear the clogged nozzles. Are the nozzles clear? | -- | -- | |
8 | Inspect for an open (blown) wiper fuse. Is the fuse open (blown)? | -- | Go to Step 9 | Go to Step 10 |
9 | Replace the open (blown) fuse. Is the repair complete? | -- | -- | |
10 |
Is the test light on? | -- | Go to Step 11 | Go to Step 14 |
11 | Inspect for a poor connection condition at the washer pump connector. Is a poor connection condition present? | -- | Go to Step 12 | Go to Step 13 |
12 | Repair the poor connection condition. Is the repair complete? | -- | -- | |
13 | Replace the washer pump. Refer to Washer Pump Replacement . Is the repair complete? | -- | -- | |
14 |
Is the test light on? | -- | Go to Step 15 | Go to Step 16 |
15 | Repair the poor connection condition or open circuit condition in CKT 1250. Is the repair complete? | -- | -- | |
16 |
Is the test light on? | -- | Go to Step 17 | Go to Step 18 |
17 | Repair the poor connection condition or open circuit condition in CKT 228. Is the repair complete? | -- | -- | |
18 | Replace the wiper/washer switch. Is the repair complete? | -- | -- |
