Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Do the wipers park? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the wiper/washer switch. Is the repair complete? | -- | -- | |
4 | Measure the voltage from connector C203 (vehicle side), terminal B, to ground using a J 39200 . Is the measurement greater than the specified value? | 1.0 V | Go to Step 6 | Go to Step 5 |
5 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement . Is the repair complete? | -- | -- | |
6 |
Is the measurement greater than the specified value? | 1.0 V | Go to Step 8 | Go to Step 7 |
7 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement . Is the repair complete? | -- | -- | |
8 | Repair the short circuit to battery voltage condition in CKT 113. Is the repair complete? | -- | -- |
