GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Engine 🢒 Engine Cooling 🢒 Coolant Level Module Replacement

Removal Procedure
  1. Disconnect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.

    2. Object Number: 289172 Size: SH
  2. Partially drain the cooling system. Refer to Cooling System Draining and Filling .
  3. Remove the surge tank. Refer to Radiator Surge Tank Replacement .
  4. Disconnect the wiring harness connector from the coolant level switch.
  5. Remove the coolant level switch.

Installation Procedure

    Object Number: 289172 Size: SH
  1. Install the coolant level switch.
  2. Connect the wiring harness connector to the coolant level switch.
  3. Install the surge tank. Refer to Radiator Surge Tank Replacement .
  4. Fill the surge tank with engine coolant.
  5. Connect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  6. Inspect for leaks.