PASSENGER AND/OR DRIVER SEAT BACK RATTLE

MODELS/YEARS 1988-90 CUTLASS SUPREME MODELS WITH AR9 OR AM6 SEAT OPTION

This bulletin supersedes Dealer Technical Bulletin 88-T-72. This bulletin has been revised to include 1989 and 1990 model years.

Seat back rattle or chucking may be repaired by installing two (2) wavy washers, P/N 17967750, and one flat washer, P/N 17967025 as described and illustrated. This repair should be applied to both passenger and driver's seat.

Parts are currently available from GMSPO.

1. Remove front seat back as described in Section 9 of the Body Service Manaul.

2. Install one flat and two wavy washers as Illustrated over the spacer.

3. Reinstall seat back and torque all bolts to specified values as called for in the service manual, Section 9.

WARRANTY INFORMATION:

Labor Operation Number: T1336 Labor Time: .5 Hours Trouble Code: 92

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.