This bulletin cancels and supersedes Dealer Technical Bulletin 91-T-238 which should be discarded.
Some 1991 HYDRA-MATIC 4L60 transmissions may exhibit a 'no reverse' or 'delayed reverse' condition when outside temperatures are below zero degrees Fahrenheit.
A transmission is considered to have a delayed reverse condition if it takes longer than three seconds for the transmission to engage when shifted into the reverse range.
If a transmission has a 'no reverse' or 'delayed reverse' condition, inspect the reverse input clutch piston outerseal. Determine if the seal is a 'short lip' or 'long lip' design by comparing it to the illustration below. If it is a short lip design, replace it with a long lip seal contained in the service packages listed under Service Parts Information.
If the reverse input clutch piston outer seal is a long lip design, or the newly installed long lip seal doesn't correct the delayed reverse condition, the reverse input clutch housing may be out of round. Inspect the housing and replace if necessary.
The long lipped seals are currently available in several service packages from GMSPO.
Description Part Number ----------- ----------- Package - Overhaul Seals and Gaskets 8683958 Package - Overhaul Repair Complete 8683959
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.