GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Alero 🢒 Body and Accessories 🢒 Doors 🢒 Armrest Bracket Replacement

Removal Procedure

    Object Number: 765410 Size: SH
  1. Remove the rear door trim panel (1). Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the armrest bracket screws.
  3. Remove the armrest bracket (2) from the door trim panel (1).

Installation Procedure

    Object Number: 765410 Size: SH
  1. Position the armrest bracket (2) on the door trim panel (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the armrest bracket screws.

    3. Tighten
    Tighten the armrest bracket screws to 10 N·m (89 lb in).

  3. Install the rear door trim pane (1). Refer to Rear Side Door Trim Panel Replacement .