Removal Procedure
- Turn the ignition switch
to the ACCY position.
- Set the wiper switch to the PULSE position.
- Turn the ignition off when the wipers are in the innerwipe position
and not moving.
- Remove the wiper blade from the wiper arm.
4.1. | Push in the button of the wiper blade clip and remove the wiper
blade from the inside radius of the wiper arm. |
4.2. | Bring the wiper arm out through the opening in the wiper blade. |
Installation Procedure
- Install the wiper blade
onto the wiper arm.
- Operate the wipers and check for proper operation.