Air Conditioning Clutch Coil Removal V5 - Direct Mount
Tools Required
• | J 8433 Compressor
Pulley Puller |
• | J 33025 Clutch
Coil Puller Legs |
- Install the compressor
onto the J 41790-A
.
- Install the J 33023-A
onto the front head of the compressor.
- Remove the compressor clutch plate and hub assembly. Refer to
Compressor Clutch Plate and Hub Assembly Removal
.
- Remove the compressor rotor and bearing assembly. Refer to
Clutch Rotor and/or Bearing Removal
.
- Mark the clutch coil terminal
location (2) on the compressor front head.
- Install the J 33025
onto the J 8433
.
- Install the J 8433
onto the compressor clutch coil (1) and tighten the puller
leg bolts.
- Tighten the center forcing screw J 8433-3
of the compressor pulley puller J 8433
against the puller pilot to remove the compressor clutch coil
from the compressor.