GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2000 🢒 S/T Isuzu - 4WD 🢒 Restraints 🢒 Seat Belts 🢒 Front Seat Belt Replacement

Removal Procedure

    Object Number: 68063 Size: SH
  1. Remove the bolt that retains the lower seat belt anchor plate to the vehicle.

    2. Object Number: 7692 Size: SH
  2. Carefully pry open the upper seat belt anchor plate cover with a flat-bladed tool.

    3. Object Number: 68062 Size: SH
  3. Remove the bolt that retains the upper seat belt anchor plate to the vehicle.
  4. Remove the body side trim panel. Refer to Body Side Trim Panel Replacement in Interior Trim.
  5. Guide the seat belt through the opening in the body side trim cover.

    6. Object Number: 68061 Size: SH
  6. Remove the bolt that retains the seat belt retractor assembly to the vehicle.
  7. Remove the seat belt retractor assembly from the vehicle.

Installation Procedure

    Object Number: 68061 Size: SH
  1. Install the seat belt retractor assembly to the vehicle.
  2. Install the bolt that retains the seat belt retractor assembly to the vehicle.

    3. Tighten
    Tighten the seat belt retractor assembly bolt to 70 N·m (52 lb ft).


    Object Number: 8751 Size: SH
  3. Guide the seat belt through the opening in the body side trim cover.
  4. Install the body side trim panel. Refer to Body Side Trim Panel Replacement in Interior Trim.
  5. Install the seat belt opening trim cover.

    6. Object Number: 68062 Size: SH
  6. Install the upper seat belt anchor plate and bolt to the vehicle.

    7. Tighten
    Tighten the upper seat belt anchor plate bolt to 70 N·m (52 lb ft).

  7. Close the upper seat belt anchor plate cover.

    8. Object Number: 68063 Size: SH
  8. Install the lower seat belt anchor plate and bolt to the vehicle.

    9. Tighten
    Tighten the lower seat belt anchor plate bolt to 70 N·m (52 lb ft).