GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2000 🢒 S/T Isuzu - 4WD 🢒 Restraints 🢒 SRS 🢒 Supplemental Restraint Instrument Panel Module Replacement

Removal Procedure

    Object Number: 388333 Size: SH
  1. Disable the SRS System. Refer to Disabling the SRS .
  2. Remove the radio. Refer to Radio Replacement .
  3. Remove the IP storage compartment door. Refer to Instrument Panel Compartment Door Replacement .
  4. Remove the bolts (4) that retain supplemental restraint IP module to the instrument panel.
  5. Remove the nuts (5) from the studs that retain the supplemental restraint IP module (2) to the instrument panel (3).
  6. Remove the supplemental restraint IP module (2) from the instrument panel (3).

Installation Procedure

    Object Number: 388333 Size: SH
  1. Install the supplemental restraint IP module (2) to the instrument panel (3).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws (4) that retain the supplemental restraint module to the instrument panel.

    3. Tighten
    Tighten the fasteners to 8.0 N·m(71 lb in).

  3. Install the nuts (5) to the studs (1) in order to retain the inflatable restraint IP module to the instrument panel.

    4. Tighten
    Tighten the nuts to 8 N·m(71 lb in

  4. Install the radio. Refer to Radio Replacement .
  5. Install the IP storage compartment door. Refer to Instrument Panel Compartment Door Replacement .
  6. Enable the SRS System. Enabling the SRS