The park brake must be adjusted any time the park brake cables have been replaced or disconnected, if the park brake shoes have been replaced or if under heavy foot pressure the pedal travel is less than half the pedal total travel. Before adjusting the park brake, check the condition of the service brakes. Refer to Brake Pad Inspection in Disc Brakes.

1. Raise the vehicle and support the vehicle with safety stands. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Remove the caliper. Refer to Rear Brake Caliper Replacement in Disc Brakes.
4. Remove the rotor. Refer to Rear Brake Rotor Replacement in Disc Brakes.
5. Remove the park brake cable from the park brake lever.
6. Adjust the shoe diameter using the adjuster nut.
7. Turn the adjuster nut clockwise in order to increase the diameter until the rear wheel will not rotate without excessive force in a forward direction.
8. Connect the park brake cable to the park brake lever.
9. Install the caliper. Refer to Rear Brake Caliper Replacement in Disc Brakes.
10. Install the rotor. Refer to Rear Brake Rotor Replacement in Disc Brakes.
11. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
12. Adjust the rear park brake cables. Refer to Park Brake Cable Service/Adjustment .
13. Lower the vehicle.