For 1990-2009 cars only
Removal Procedure
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
| • | Turn off the lamp switch and allow the bulb to cool before changing the bulb. |
| • | Leave the lamp switch OFF until the bulb change is complete. |
| • | Always wear eye protection when changing a halogen bulb. |
| • | Handle the bulb only by its base. Avoid touching the glass. |
| • | Keep dirt and moisture off the bulb. |
| • | Properly dispose of the used bulb. |
| • | Keep halogen bulbs out of the reach of children. |
- Turn the red locking tab upward to the UNLOCK position, as noted on the rear of the headlamp.
- Pull forward on the headlamp in order to release the headlamp from the upper retainer.
- Pull up on the headlamp in order to release the headlamp from the lower retainers.
- Remove the bulb from the headlamp. Push in and rotate the bulb ¼ turn counter-clockwise.
Installation Procedure
- Install the bulb to the headlamp. Push in and rotate the bulb ¼ turn clockwise.
- Install the headlamp to the lower retainers. Ensure that the headlamp harness does not get pinched.
- Push the headlamp rearward in order to install the headlamp to the upper retainer.
- Push the red locking tab downward to the LOCK position as noted on the rear of the headlamp.
