Tools Required

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the rear propeller shaft. Refer to Rear Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement in Propeller Shaft.



3. UsingJ 36825 andJ 23907 , pry the seal out of the extension housing.

Tools Required

1. PositionJ 36502-2A over the output shaft.



2. UsingJ 36502 install the rear output shaft seal.



3. RemoveJ 36502-2A from the output shaft.



4. Fill the space between the seal lips with grease.
5. Install the rear propeller shaft. Refer to Rear Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement in Propeller Shaft.
6. Check the transmission oil level. Refer to Fluid Replacement .
7. Lower the vehicle.