GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2000 🢒 S/T Isuzu - 2WD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Brake Fluid Level Indicator Switch Replacement

Removal Procedure

    Object Number: 176836 Size: SH
  1. Disconnect the electrical connector from the fluid level sensor.
  2. Use needle nose pliers in order to compress the locking tabs at the opposite side of the master cylinder. (1)
  3. Remove the fluid level sensor (1).

Installation Procedure

    Object Number: 176836 Size: SH
  1. Install the fluid level sensor (1) until the locking tabs snap into place.
  2. Connect the electrical connector to the fluid level sensor.