Tools Required

J 34011 Pilot Bearing Remover

1. Remove the inner axle shaft and housing assembly. Refer to Inner Axle Housing Shaft and Housing Replacement .
2. Remove the clutch shaft from the carrier.



3. Remove the clutch shaft pilot bearing with the J 34011 .

Tools Required

J 33842 Pilot Bearing Installer

1. Install the clutch shaft pilot bearing using the J 33842 . Lubricate the bearing with axle lubricant, as specified in Fluid and Lubricant Recommendations in Maintenance and Lubrication.
2. Install the clutch shaft to the carrier.
3. Install the inner axle shaft and housing assembly. Refer to Inner Axle Housing Shaft and Housing Replacement .