GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2002 🢒 Isuzu T-Series (Truck Line C) 🢒 Engine 🢒 Engine Exhaust 🢒 Engine Brake Replacement

Removal Procedure
  1. Drain the air tank. Refer to Draining Reservoirs in Air Brakes.

    2. Object Number: 385830 Size: SH
  2. Disconnect the air line from the exhaust brake actuator elbow.

    3. Object Number: 376940 Size: SH
  3. Note position of lower exhaust clamp and loosen.
  4. Remove the rear exhaust manifold pipe from the exhaust brake.
  5. Note position of the top exhaust brake clamp and the exhaust brake.
  6. Disconnect the top exhaust brake clamp, the exhaust brake and the gasket from the exhaust manifold pipe.
  7. Note position of the elbow and remove from the exhaust brake actuator.

Installation Procedure

    Object Number: 385832 Size: SH
  1. Install the elbow to the exhaust brake actuator in original position.

    2. Object Number: 376940 Size: SH
  2. Install the new gasket, the exhaust brake on the exhaust manifold pipe with the upper clamp in original position.
  3. Install the lower manifold pipe to exhaust brake with clamp in original position.

    4. Object Number: 385830 Size: SH
  4. Connect the air line to the elbow on the exhaust brake actuator.
  5. Refill air tank. Refer to Filling Reservoirs in Air Brakes.
  6. Check system for leaks.