GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2007 🢒 Isuzu H-Series 🢒 Driver Information and Entertainment 🢒 Displays and Gages 🢒 Air Cleaner Filter Restriction Gage Replacement

Removal Procedure

    Object Number: 898712 Size: SH
  1. Remove the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.
  2. Remove the gage cluster bezel (2) from the instrument panel by releasing the retaining tabs (1).

    3. Object Number: 898706 Size: SH
  3. Remove the air line (2) from the gage (1).
  4. Remove the screws that retain the gage to the bezel.
  5. Remove the gage from the bezel.

Installation Procedure

    Object Number: 898706 Size: SH
  1. Install the gage to the bezel.
  2. Install the screws that retain the gage to the bezel.

    3. Tighten the screw until fully seated but not stripped.

  3. Install the air line  (2) to the gage (1).

    4. Object Number: 898712 Size: SH
  4. Install the gage cluster bezel (2) to the instrument panel.
  5. Install the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.