Transmission Housing Oil Seal Replacement - Rear RWD

Tools Required

J 45868 RWD Output Shaft Seal Installer

1. Remove the rear propeller shaft. Refer to One-Piece Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement .



2. Using a suitable tool, pry the rear transmission housing oil seal from the transmission housing.

1. Using the J 45868 and a hammer, install the NEW rear transmission housing oil seal.
2. Check the transmission fluid level. Add if necessary. Refer to Transmission Fluid Replacement .
3. Install the rear propeller shaft. Refer to One-Piece Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement .

Transmission Housing Oil Seal Replacement - Rear 4WD

Tools Required

1. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement .



2. Using the J 6125-1B  (1) and J 23129  (2) remove the rear transmission housing oil seal from the housing.

1. Using the J 45867 and a hammer, install the NEW rear transmission housing oil seal.
2. Check the transmission fluid level. Add if necessary. Refer to Transmission Fluid Replacement .
3. Install the transfer case assembly. Refer to Transfer Case Assembly Replacement .