GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Isuzu
🢒
2006
🢒
I-280
🢒
General Information
🢒
General Information
🢒 Wheel Stud Replacement
Tools Required
J 43631
Ball Joint Separator
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove the rear brake drum. Refer to
Brake Drum Replacement
.
Using the
J 43631
, remove the wheel stud.
Installation Procedure
Position the wheel stud in the axle flange .
Install the 4 washers and the lug nut to the stud.
Tighten the lug nut until the stud fully seats.
Remove the lug nut and the washers.
Install the rear brake drum. Refer to
Brake Drum Replacement
.
Lower the vehicle.