GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Isuzu
🢒
2008
🢒
Ascender - 4WD
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 Rear Window Wiper and Washer Switch Replacement
Removal Procedure
Remove the instrument panel (I/P) accessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
.
Disconnect the electrical connector from the wiper washer switch.
Release the wiper washer switch locking tabs.
Remove the switch from the trim plate.
Installation Procedure
Position the switch to the trim plate.
Connect the electrical connector to the wiper washer switch.
Install the switch to the instrument panel trim plate, ensuring that the locking tabs are properly seated.
Install the I/P accessory trim plate. Refer to
Instrument Panel Accessory Trim Plate Replacement
.