GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Isuzu
🢒
2007
🢒
Ascender - 4WD
🢒
Power and Signal Distribution
🢒
Power Outlets
🢒 12-Volt Quarter Trim Panel Accessory Power Receptacle Replacement
Removal Procedure
Partially remove the body side trim panel. Refer to
Rear Quarter Trim Panel Replacement - Left Side
.
Disconnect the electrical connector from the 12-volt outlet assembly.
Remove the threaded ring and lock washer from the outlet.
Remove the outlet assembly from the vehicle.
Installation Procedure
Install the outlet assembly properly indexed to the body side trim panel.
Install the lock washer and threaded ring.
Connect the electrical connector.
Install the body side trim panel. Refer to
Rear Quarter Trim Panel Replacement - Left Side
.