For 1990-2009 cars only
SMU - Revised Wheel Alignment Specifications
| Subject: | Revised Wheel Alignment Specifications |
| Models: | 2006 HUMMER H3 |
This bulletin is being issued to revise the Wheel Alignment Specifications in the Wheel Alignment sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Truck Line | Caster +/- 1.0 Degree | Cross Caster (L - R) +/- 0.75 Degree | Camber +/- 0.6 Degree | Cross Camber (L - R) +/- 0.6 Degree | Total Toe +/- 0.20 Degree | Steering Wheel Angle +/- 3.5 Degree | ||
|---|---|---|---|---|---|---|---|---|
Left | Right | Left | Right | |||||
H3 | 2.80° | 3.10° | -0.30° | 0.00° | 0.00° | 0.00° | 0.00° | -1.0° |
