Preliminary Procedures

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Remove the generator. Refer to Generator Replacement .
3. Using J 38185 , reposition the hose clamp at the heater outlet fitting.
4. Remove the heater inlet hose from the heater outlet fitting.
5. Remove the heater inlet hose from the heater core.

1

Transmission Housing Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Heater Inlet Hose

Tip
Check for coolant leak around the heater inlet hose connections.