Preliminary Procedure

1. Remove either the RH or LH front wheelhouse panel. Refer to Wheelhouse Panel Replacement .
2. Remove the front grille. Refer to Grille Replacement .
3. Disconnect the electrical connector from the daytime running lamp (DRL) bulb socket.

1

Park and Turn Signal Lamp Bolt (Qty: 3)

Tighten
5 N·m (44 lb in)

Tip
Support the lamp assembly when removing the bolts.

2

Park and Turn Signal Lamp Assembly

Tip

1. Remove the bulb sockets from the park and turn signal lamp assembly.
2. Remove the park and turn signal lamp assembly by sliding forward.