GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2006 🢒 H3 🢒 Engine 🢒 Engine Mechanical - 3.5L (L52) 🢒 Engine Lift Bracket Replacement

Removal Procedure

    Object Number: 1350738 Size: SH
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Remove the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift bracket (1).
  3. Carefully disengage the engine wiring harness conduit from the engine lift bracket (1).

    4. Object Number: 1313647 Size: SH
  4. Remove the 3 generator bolts and reposition the generator.

    5. Object Number: 858182 Size: SH
  5. Remove the engine lift bracket bolts.
  6. Remove the engine lift bracket.

Installation Procedure

    Object Number: 954203 Size: SH
  1. Position the engine lift bracket.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the engine lift bracket bolts.

    3. Tighten

    1. Tighten the bolts a first pass in sequence to 5 N·m (44 lb in).
    2. Tighten the bolts a final pass in sequence to 50 N·m (37 lb ft).

    Object Number: 1313647 Size: SH
  3. Position the generator to the engine.
  4. Install the 3 generator bolts.

    5. Tighten
    Tighten the bolts in sequence to 50 N·m (37 lb ft).


    Object Number: 1350738 Size: SH
  5. Engage the engine wiring harness conduit to the engine lift bracket (1).
  6. Install the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift bracket (1).

    7. Tighten
    Tighten the bolt to 9 N·m (80 lb in).

  7. Install the drive belt. Refer to Drive Belt Replacement .