GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2007 🢒 H2 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Garage Door Opener Transmitter Replacement

Removal Procedure

    Object Number: 827782 Size: SH
  1. Remove the overhead console to expose the garage door opener panel.

    2. Object Number: 815910 Size: SH
  2. Remove the screws from the garage door module.

    3. Object Number: 827780 Size: SH
  3. Disconnect the electrical connector from the garage door opener.
  4. Remove the button and module assembly from the overhead console.

Installation Procedure

    Object Number: 827780 Size: SH
  1. Install the button and module assembly to the overhead console.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 815910 Size: SH
  2. Align the module and screws into the overhead console.

    3. Tighten
    Tighten the screws to 8 N·m (70 lb in).


    Object Number: 827784 Size: SH
  3. Connect the individual connectors to the garage door module.

    4. Object Number: 827786 Size: SH
  4. Fasten the overhead console to the headliner.
  5. Refer to Control Module References for programming and setup information.