GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 HUMMER 🢒 2006 🢒 H2 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Front Cable Replacement

Removal Procedure
  1. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling .
  2. Remove the park brake pedal. Refer to Parking Brake Lever Pedal Assembly Replacement .

    3. Object Number: 376010 Size: SH
  3. Roll the carpet back to access cable grommet.
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    5. Object Number: 363830 Size: SH
  5. Disengage the grommet and the cable from the floor pan.
  6. Disconnect the front cable from the rear cable.
  7. Remove the cable from the body mount by depressing the retaining tabs.
  8. Remove the cable.

Installation Procedure

    Object Number: 363830 Size: SH
  1. Install the cable.
  2. Snap the retainer tabs into the body mount.
  3. Connect the front cable to the rear cable.
  4. Route the cable in through the floor pan and engage the grommet.
  5. Remove the safety stands.
  6. Lower the vehicle.

    7. Object Number: 376010 Size: SH
  7. Roll the carpet into place.
  8. Install the park brake pedal. Refer to Parking Brake Lever Pedal Assembly Replacement .
  9. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling .