GM Service Manual Online
For 1990-2009 cars only

Sail Panel Molding Replacement Left Side

Removal Procedure


    Object Number: 1412539  Size: SH
  1. Remove the left side cargo box rail. Refer to Cargo Box Rail Replacement .
  2. Remove the left rear cargo box protector. Refer to Cargo Box Side Rail Protector Replacement .
  3. Remove the left rear luggage carrier side end cap. Refer to Luggage Carrier Side Rear Rail Cap Replacement in Roof.
  4. Remove the screw securing the left outer sail panel to the rear header garnish molding.
  5. Remove the rear door sealing strip from the pinch-weld flange.
  6. Remove the screw under the left rear quarter opera window.

  7. Object Number: 1428008  Size: SH
  8. Release the adhesive tape securing the forward edge of the outer sail panel molding (2) to the body.
  9. Remove the rear door sealing strip from the pinch-weld flange.
  10. Remove the screw under the left rear quarter opera window.

  11. Object Number: 1412537  Size: SH
  12. Release the vertical row of retainers securing the sail panel to the body.
  13. Remove the left outer sail panel from the vehicle.

Installation Procedure

    Important: Do not release the adhesive tape backing on the sail panel molding until the retainers are fully seated to the body. Fold the adhesive tape backing to the outboard edge of the adhesive tape on the sail panel molding.

  1. Position the sail panel molding to the body structure.

  2. Object Number: 1412537  Size: SH
  3. Align the holes in the body and secure the plastic retainer clips.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the screw securing the left outer sail panel to the top rear header garnish molding.
  6. Tighten
    Tighten the screw to 10 N·m (89 lb in).


    Object Number: 1427917  Size: SH
  7. Install the left rear luggage carrier side end cap. Refer to Luggage Carrier Side Rear Rail Cap Replacement in Roof.
  8. Install the sail panel screw under the left rear quarter opera window.

  9. Object Number: 1428008  Size: SH
  10. Release the adhesive tape backing from the forward edge of the sail panel and completely wet out the adhesive tape using a clean dry shop towel and the palm of the hand.
  11. Re-secure the rear door outer sealing strip to the pinch-weld flange.

  12. Object Number: 1412539  Size: SH
  13. Install the left rear cargo box protector. Refer to Cargo Box Side Rail Protector Replacement .
  14. Install the left side cargo box rail. Refer to Cargo Box Rail Replacement .