Headlight Aim Too High (Adjust Aim)

Some customers may comment that they are being flashed with the headlights of oncoming drivers while driving at night.

The headlamp aim may be too high.

Use the screen method for headlamp aiming. The set up information for this is contained in the Headlamp Aiming procedure in SI (Document ID #811880 for the   2003 HUMMER H2). After the screen with the horizontal and vertical reference points has been established and the vehicle is in the position 7.5 m (25 ft) from the screen, aim the headlamps to a point 203 mm (8 in) below the horizontal line directly on the vertical lines. This will prevent oncoming drivers from being affected.

For vehicles repaired under warranty, use: