GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Generic 🢒 2005 🢒 Unit Repair 🢒 Restraints 🢒 SIR 🢒 Center Pillar Upper Garnish Molding Replacement

Removal Procedure
  1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling in SIR.

    2. Object Number: 1219141 Size: SH
  2. Lower the seat belt D-ring adjuster.
  3. Remove the fastener from the D-ring.
  4. Remove the D-ring.
  5. Starting at the top, remove the garnish molding by pulling forward.

Installation Procedure
  1. Starting at the bottom, install the garnish molding to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1219141 Size: SH
  2. Position the seat belt D-ring and install the D-ring fastener.

    3. Tighten
    Tighten the fastener to 35 N·m (25 lb ft).

  3. Enable the roof rail SIR system. Refer to SIR Disabling and Enabling in SIR.