Cause
| Correction
|
Seized accessory drive system component
|
- Remove the accessory drive belts.
- Confirm that the engine will rotate. Rotate the crankshaft by hand at
the crankshaft balancer or flywheel location.
- Repair or replace the components as required.
|
Seized automatic transmission torque converter
|
- Remove the torque converter-to-flywheel bolts.
- Confirm that the engine will rotate. Rotate the crankshaft by hand at
the crankshaft balancer or flywheel location.
- Repair or replace the components as required.
|
Seized manual transmission
|
- Disengage the clutch by depressing the clutch pedal.
- Confirm that the engine will rotate. Rotate the crankshaft by hand at
the crankshaft balancer or flywheel location.
Refer to Manual Transmission
in the Transmission/Transaxle/Transfer Case Unit Repair Manual.
|
Broken timing chain
|
| • | Inspect the timing chain and gears. |
| • | Repair or replace the components as required. |
|
Seized timing chain or timing gears
|
| • | Inspect the timing chain and gears for foreign material or a seized chain. |
| • | Repair or replace the components as required. |
|
Seized or broken camshaft
|
| • | Inspect the camshaft and the camshaft bearings. |
| • | Repair or replace the components as required. |
|
Bent valve in the cylinder head
|
| • | Inspect the valves and the cylinder heads. |
| • | Repair or replace the components as required. |
|
Seized oil pump
|
| • | Inspect the oil pump assembly. |
| • | Repair or replace as required. |
|
Hydraulically locked cylinder
| • | Coolant/antifreeze in the cylinder |
|
- Remove spark plugs and check for fluid in the cylinder. When rotating
the engine with the spark plugs removed, the piston, on compression stroke, will
push fluid from the combustion chamber. Refer to
Coolant in Combustion Chamber
.
- Inspect for failed/broken head gaskets.
- Inspect for a cracked engine block or cylinder head.
- Inspect for a sticking fuel injector.
- Repair or replace the components as required.
|
Material in the cylinder
|
| • | Inspect the cylinder for damaged components and/or foreign materials. |
| • | Repair or replace the components as required. |
|
Seized crankshaft or connecting rod bearings
|
| • | Inspect crankshaft and connecting rod bearings. |
| • | Repair or replace the components as required. |
|
Bent or broken connecting rod
|
| • | Inspect the connecting rods. |
| • | Replace the piston and pin as an assembly, as required. |
|
Broken crankshaft
|
| • | Inspect the crankshaft. |
| • | Repair or replace the components as required. |
|
