For 1990-2009 cars only
- Remove the camshaft position sensor bolt and the sensor.
- Remove the camshaft retainer bolts and the retainer.
- Remove the camshaft.
Notice: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.
| 3.1. | Install the 3 M8-1.25 x 100 mm bolts in the camshaft front bolt holes. |
| 3.2. | Using the bolts as a handle, carefully rotate and pull the camshaft out of the engine block. |
| 3.3. | Remove the bolts from the front of the camshaft. |
