GM Service Manual Online
For 1990-2009 cars only

DTC Descriptor

DTC C0551: Option Configuration Error

Diagnostic Fault Information

Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.

Circuit/System Description

The electronic suspension control (ESC) module performs internal checks on the software calibrations contained in the electrically erasable programmable read-only memory (EEPROM) to ensure valid operation.

Conditions for Running the DTC

The ignition is ON.

Conditions for Setting the DTC

The ESC module detects internal problems with software calibrations.

Action Taken When the DTC Sets

    â€¢ ESC is disabled.
    â€¢ SERVICE SUSPENSION SYSTEM and SPEED LIMITED message is displayed in the driver information center (DIC).

Conditions for Clearing the DTC

The condition is no longer present.

Circuit/System Verification

Verify that DTC C0551 is not set.

⇒If the DTC is set, program the electronic suspension control module. If the DTC resets, replace the ESCM.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

Control Module References for ESCM replacement, setup, and programming