Assist Step Controller Replacement. GMC Truck Yukon Denali 2008

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2008 🢒 Yukon Denali 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Assist Step Controller Replacement

Callout	Component Name
1	Power Assist Step Controller Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 6 N·m (53 lb in)
2	Power Assist Step Controller Procedure Disconnect any electrical connectors. Reprogram the new controller if necessary. Refer to Control Module References .

Callout

Component Name

Power Assist Step Controller Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
6 N·m (53 lb in)

Power Assist Step Controller