Removal Procedure
- Turn OFF the ignition.
- Disconnect the mass air
flow (MAF) sensor harness connector.
Notice:
| • | Handle the MAF sensor carefully. |
| • | Do not drop the MAF sensor in order to prevent damage to the MAF
sensor. |
| • | Do not damage the screen located on the air inlet
end of the MAF. |
| • | Do not touch the sensing elements. |
| • | Do not allow solvents and lubricants to come in contact with the
sensing elements. |
| • | Use a small amount of a soap based solution in order to aid in
the installation. |
- Remove the MAF sensor from
the air cleaner cover and air cleaner outlet duct by loosening the hose clamps.
Installation Procedure
Important: The embossed arrow on the MAF sensor indicates the proper air flow direction.
The arrow must point towards the engine.
- Install the MAF sensor to the air cleaner outlet duct and the air cleaner
cover.
- Secure the air cleaner cover and outlet duct to the MAF sensor.
- Connect the MAF sensor
harness connector.
