DEFINITION: The right turn indicator does not operate in the instrument cluster, but the left turn indicator operates, and all exterior turn signal lamps operate correctly.

Review the turn signal operation and perform the necessary inspections.

Did you complete the system review and inspection?

--

Go to Step 2

Go to Symptoms

1. Turn the ignition ON with the engine off.
2. Attempt to operate the right turn signal.

Does the right turn indicator in the instrument cluster operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Disconnect the instrument cluster connector.
2. Place the turn signal lever in the right turn position.
3. Turn the ignition ON with the engine off.
4. Measure the voltage at cavity A7 of the instrument cluster connector.

Did the measurement toggle between 0 volts and battery voltage?

--

Go to Step 5

Go to Step 4

Repair the open CKT 15 (DK BLU) between splice S237 and the instrument cluster.

Did you complete the repair?

--

Go to Step 7

--

1. Inspect the right turn indicator bulb.
2. Replace the right turn indicator bulb, as necessary.

Did you replace the bulb?

--

Go to Step 7

Go to Step 6

Replace the instrument cluster.

Did you complete the repair?

--

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3