Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
DEFINITION: The right rear turn signals do not operate, but all other front and rear turn signals and the taillamps (rear park lamps) operate correctly. | ||||
1 | Review the turn signal operation and perform the necessary inspections. Did you complete the system review and inspection? | -- | Go to Step 2 | Go to Symptoms |
2 | Attempt to operate the right turn signals. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Did you replace a defective bulb? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair the open CKT 15 (DK BLU) between splice S237 and the right rear turn signal lamp connector. Did you complete the repair? | -- | Go to Step 5 | -- |
5 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
DEFINITION: The right rear turn signal is inoperative, but all other front and rear turn signals are operating. | ||||
1 | Review the turn signal operation and perform the necessary inspections. Did you complete the system review and inspection? | -- | Go to Step 2 | Go to Symptoms |
2 | Attempt to operate the turn signals. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is continuity present? | -- | Go to Step 5 | Go to Step 4 |
4 | Locate and repair the open CKT 250 (BLK) between the turn signal lamp connector and ground. Did you complete the repair? | -- | Go to Step 8 | -- |
5 |
Did the measurement equal battery voltage? | B+ | Go to Step 7 | Go to Step 6 |
6 | Locate and repair the open CKT 15 (DK BLU) between the right rear turn signal lamp connector and ground. Did you complete the repair? | -- | Go to Step 8 | -- |
7 | Replace the right rear turn signal lamp bulb. Is the repair complete? | -- | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |