Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Review the window switch illumination operation and perform the necessary inspections. Did you complete the system review and inspection? | -- | Go to Step 2 | Go to Symptoms |
2 | Turn on the park lamps and observe the window switch illumination. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is the measurement equal to battery voltage? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair the open CKT 9 (BRN) between the headlamp switch and the window switch. Did you complete the repair? | -- | Go to Step 8 | -- |
5 | At the window switch connector, test for continuity between ground and the ground circuit wire (BLK). Does the test indicate continuity? | -- | Go to Step 7 | Go to Step 6 |
6 | Repair the open CKT 150 (BLK) between the window switch and ground. Did you complete the repair? | -- | Go to Step 8 | -- |
7 | Replace the window switch. Did you complete the repair? | -- | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
