Side Marker Lamp Inoperative - One Lamp Domestic
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The front side marker does not operate on one side of the vehicle, but the front and rear parklamps and turn signals are operating correctly. | ||||
1 | Review the side marker operation and perform the necessary inspections. Did you complete the system review and inspection? | -- | Go to Step 2 | Go to Symptoms |
2 | Turn on the park lamps. Do the side marker lamps operate correctly? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is the bulb okay? | -- | ||
4 | Replace the front side marker lamp bulb. Is the repair complete? | -- | -- | |
5 |
Is the measurement equal to battery voltage? | B+ | ||
6 | Repair the open CKT 9 (BRN) between splice S135 and the marker lamp. Did you complete the repair? | -- | -- | |
7 | Repair the open circuit (BLK) or (BLK/WHT) between the side marker lamp connector and ground. Did you complete the repair? | -- | -- | |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
Side Marker Lamp Inoperative - One Lamp Export
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The front position lamp does not operate on one side of the vehicle, but the front and rear parklamps and turn signals are operating correctly. | ||||
1 | Review the position lamp operation and perform the necessary inspections. Did you complete the system review and inspection? | -- | Go to Step 2 | Go to Symptoms |
2 | Turn on the park lamps. Do the position lamps operate correctly? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is the bulb okay? | -- | ||
4 | Replace the position lamp bulb. Did you complete the repair? | -- | -- | |
5 |
Is the measurement equal to battery voltage? | B+ | ||
6 | Repair the open CKT 9 (BRN) between splice S225 and the position lamp. Did you complete the repair? | -- | -- | |
7 | Repair the open circuit (BLK) or (BLK/WHT) between the position lamp connector and ground. Did you complete the repair? | -- | -- | |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
