Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The stop lamp on one side of the vehicle is inoperative, but the stoplamp operates on the other side of the vehicle. | ||||
1 | Review the stoplamp operation and perform the necessary inspections. Did you complete the system review and inspection? | -- | Go to Step 2 | Go to Symptoms |
2 | Attempt to operate the stoplamps. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Is the bulb okay? | -- | Go to Step 5 | Go to Step 4 |
4 | Replace the defective stoplamp bulb. Did you complete the repair? | -- | Go to Step 8 | -- |
5 | Test for continuity between ground and terminal G of the stoplamp bulb socket. Did the test indicate continuity? | -- | Go to Step 7 | Go to Step 6 |
6 | Repair the open circuit (BLK) between the taillamp connector and ground. Did you complete the repair? | -- | Go to Step 8 | -- |
7 | Repair the open CKT 17 (WHT) between splice S410 and the taillamp connector. Did you complete the repair? | -- | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
